Active GPS Antenna
Active GPS Antenna-1
Key Specifications/Special Features:
- Narrow bandwidth: <50MHz
- Wide input power supply voltage from 2.75 to 12V
- RG174 double shield low loss, 2.7mm size
- Short-circuit protection as a standard design
- RF protection on the front end
- Dimensions: 31 x 24.5 x 7mm +/- 0.5mm
GPS (Global Position System) is a technique used for position or navigation by receiving and transmitting satellite signals. In order to receive the signals, the antenna is necessary. All GPS satellites broadcast at the same two frequencies, 1575.42 MHz (L1 signal) and 1227.6 MHz (L2 signal), which L1 is for civilian use. The L1 signal is circular polarization, and the strength is around -166DBM, which is weaker signal by comparison with others. These characteristics determine the specifications of the antenna that are used for receiving GPS signals. Our Ceramic Patch Antenna is custom made that meets all characteristics mentioned above, and also has the advantage of small size and a little effect on environmental change of temperature.
GPS is by receiving satellite signals, Terminal for positioning or navigation. And accept the signals to the antenna must be used. Into L1 and L2 GPS satellite signals, frequency and 1575.42MHZ, respectively, where L1 is the opening of civil signals, the signal is circular polarization. Signal strength is about -166DBM, belonging to the weaker signal. These characteristics determined to prepare specifically for the GPS signal receiving antenna. Our CERAMIC PATCH ANTENNA has the advantage of small size, and environmental effects of temperature change on its little.